Mixing the cleaning solution
- Place the two dishwasher tablets into the small bowl and pour in the 200 ml of warm water. Stir gently with a spoon or the sponge until the tablets dissolve completely, forming a clear, slightly bubbly liquid. You’ll notice a faint scent of citrus or lemon, typical of many dishwasher formulas; this indicates the surfactants are active.
- Check the consistency – the solution should be thin enough to spread easily but foamy enough to cling to the oven walls. If it looks too watery, add a little more tablet; if overly thick, add a splash of warm water. The goal is a medium‑viscosity foam that will stay in place when applied.
Mixing the solution in a bowl rather than directly on the oven prevents premature drying and ensures you have enough foam to cover all interior surfaces. The warm water accelerates dissolution, so you won’t waste time waiting for the tablets to break down.
Applying the solution to the oven
- Dip the sponge into the foam and begin spreading it across the interior of the oven. Start at the bottom, working upward, because gravity will help the solution flow over the sides. Coat the walls, the door, and especially the racks if you plan to clean them in the same session.
- Focus on areas with visible grease or burnt‑on food. The foam will turn a light shade of yellow or green as it reacts with the grime. Apply a generous layer, ensuring the foam is thick enough to stay on the surface for several minutes.
- If you notice any spots where the foam runs off too quickly, re‑apply a fresh dab of solution. The aim is a continuous film that will work its magic without drying out prematurely.
During application, you should feel the foam slightly gritty under the sponge – that grit is the micro‑scrubbing particles released by the tablet. This tactile feedback tells you the solution is active and ready to lift stubborn deposits.